| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
|
Still deciding? Get samples of US$ 110/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
One OEM Manufacturer for One OEM Manufacturer for transaxle motor, DC Wiper Motor, Wheelchair motor and controller
This controller is a permanent magnet motor speed controller. It offers smooth, silent, cost effective control of motor speed and torque. Controller is designed for use in mobility aid scooter and other small electric vehicles, such as sweeper or scrubbers.
Features include:
(1)Full bridge power MOSFET Design, providing infinitely variable forward, reverse, drive and brake control;
(2)Programmability throught handheld programmer;
(3)Complete diagnostics through handheld programmer and a status LED;
(4)Available for single-ended or wigwag 5kΩ potentiometer throttles and 5V throttles;
(5)Two different operating modes allowing optimization of vehicle characeristics for different driving conditions;
(6)Speed limit input provides linear variable speed limiting;
(7)Current limiting in both driving and regnerative braking modes;
(8)Load compensation stabilizes speed on ramps and over obstacles:
(9)Speed scaler eliminates variations in Maximum speed that would otherwise result from variations in battery charge levels;
(10)High pedal disable function with lockout monitors status of the throttle during turn-on and prevents operation until the throttle has been returned to neutral;
(11)Key-off deceleration function provides a controlled deceleration if the keys witch is turned off while driving:
(12)"Emergency stop" provides a faster deceleration in emergency condition:
(13)Anti-rollback / anti-roll-forward function sets brake delay according to speed and direction for improved braking response and minimized rollback on hills, etc:
(14)"Push" input relases brake for key-on pushing:
(15)Missing / shorted brake detection forces neutral in the event of an open or shorted brake circuit:
(16)Reverse beeper option can be used to drive a low current dc horn when vehicles is in reverse
(17)Inhibit input disables the controller and puts the vehicle in a safe state during charging etc.
(18)Undervoltage cutback function protects against operation at low battery voltage;
(19)Overvoltage protection shorts the motor and disables driving in the event of excessive battery voltage;
(20)Thermally protected;
(21)BDI output can be used to provide data to a voltmeter
1. Inner packing: Poly bag, air bubble bag, carton, according to buyer's request.
2. Outer packing: wooden case, double corrugated carton or adding pallet.
3. Please remember to leave the correct contact ADDRESS information for delivery.
the following is its package on its electric transaxle.
Our Core range of DC motors, electric transaxle motor, wheelchair motor and gearboxes are specifically designed to be interchangeable and versatile, this helps us keep lower stock levels while achieving the customization necessary for so many applications. The core offer has also enabled us to offer excellent pricing levels for low quantities, often prototypes are very expensive due to lack of economies of scale we have tried to help with this as much as possible. HANGZHOU LECTSTYLE can offer bespoke units for larger quantities and offer a Supply Chain service where we work closely with our customers to identify the optimal delivery schedule in accordance with OEM production levels. If you are looking for DC motors, electric transaxle motor, wheelchair motor and gearboxes, you have come to the right place, our expert technical sales staff will recommend the best possible option for both your application and your pocket. Contact us now to discuss your application.
HANGZHOU LECTSTYLE TRADE CO., LTD is responsible for exporting the above products, and we also import some important products from oversea markets.
Our company has got the right of import and export from the Government department.
It is necessary to get your specific requirement when contacting us,
(1) for example of motor, voltage, power, speed, output torque, connecting type and size of shaft, outside structure drawing or relevant pictures etc.
(2) for example of electric transaxle, confirm its wheel base, power, voltage, industry field, running speed, wheel tyre's diameter and width, loaded weight etc, and then we will give the accurate offers.
Therefore, hope to get your feedback soon.
CHOOSE US FOR:
1. We offer engineer suggestion to your specified design in production improvement and cost saving.
2. R&D and QC department focus on the products to meet your strict requirements.
3. Different surface treatments available, plating, power coating, painting, anodized,polishing, electrophoresis, etc.
4. Different dimensions according to buyer's request.
5. Various packagings according to specific requirements.
6. Customized and tailored orders are welcome.
7. Good quality and Quick action.
8. Our products have been exported to America, Australia,German,Korea,Indian.
CONFIDENTIAL POLICY:
1) The appointed products are only for you.
2) Your informations&documents are confidential.
3) Your drawings&sketch are confidential.
Please watch our process steps as below
(1) process these output shafts
(2)process these spur gears and sprockets
(3) turning machining
(4) assembly preparation
(5) assembly workshop
(6) inspection test before shipment
Our products can be repaired or replaced the new parts with free cost in three months.
Question:
1.Q:How about mould cost?
A: primarily depend on : 1.Drawing, 2.material, 3.weight and quantity.
We need to know the structure of each parts to analyze the mold solution by:
1) --Complete design drawing or actual sample ----- the best way
--3D/2D drawing with complete dimension for each parts
--Clearly photos for each parts with more angle-views to show every features.
2)The materials and surface treatments.
3)The quantity of order.
2.Q:How to control the product processing?
A: The processing report or pictures will be sent to the customer every week/ each month for review.
3.Q:Who will own the mould?
A:Customer, also the mould can be kept in our factory for future order.
4.Q:How long do you make your quotation?
A:After receiving detail informations we will quote in 1 to 3 days.
5.Q: Are the samples/prototype free of charge?
A: charged,but it will be returned to buyer when an order confirmed and order quantity is over 5000 pcs.
After your drawing confirmed and charges done for the prototype, we will produce a sample
by CNC machining. And the first trial samples (1-3pcs) will be shipped to buyer
by the DHL /Fedex at buyer's express account or prepay the express charges.
6. which kind of throttle type on this controller would you like?
(1)potentiometer throttle: 0--5K, 0-2.5-5K, 5-0 K, 5-2.5-0 K;
(2) voltage throttle: 0-5V, 0-2.5-5V, 5-0 V, 5-2.5-0 V;
7. How amper on this controller must have control fuse?
For example, 36V 160A 1.20KW motor, its control fuse is 100-120 A current.
8. How is factory programmed parameter of Direction SWITCHES" on this controller?
For example, 36V 160A 1.20KW motor, its parameters on the controller is set to "2", single-ended throttle
MOQ? --- 100units and accept sample order.
){kind=link}